PRICE LIST

Index
Diamond & CBN mounted points
Diamond tapered hones for drawing dies
Diamond & CBN Mounted Contour Tools
Diamond & CBN Mounred Contour Tools
Diamond dental burs (FG type)
Diamond laboratory dental burs
Diamond files
Diamond hand files
Diamond machine files
Air lapper linkage & spec. flat files
Diamond plated thin wall drill bits
HMF-Holder & HMF-Files
Diamond plated forming wheels
Diamond block dressers 		C/No.901
C/No.902
C/No.903
C/No.904
C/No.905
C/No.906
C/No.907
C/No.908
C/No.909
C/No.910
C/No.913
C/No.914
C/No.917
C/No.918
   Diamond plated routers
Micro diamond drills
Diamond twist drills
Diamond plated core drills
Diamond plated circular saws
Diamond lapping blades
Diamond plated mounted saws
Len periphery diamond grinding wheels
Diamond powder
Diamond compound
Diamond plated paper & wheels
Diamond lapping slurries
Diamond plated stone reker
Diamond plated wire sawing pearl 		C/No.920
C/No.921
C/No.922
C/No.924
C/No.926
C/No.927
C/No.929
C/No.930
C/No.931
C/No.932
C/No.933
C/No.934
C/No.935
C/No.937

 

DIAMOND & CBN MOUNTED POINTS

Order Code (Please find the Item with diamonds
in inch on the right of below table)
A 3 004 C D
Cylinder Shaft
Diameter		 Diamond
Diameter
In 1/10mm		 Grit size:
C-Coarse
M-Med
F-Fine		 D-Diamond
C-CBN
HONGIA diamond mounted points (silver color) are used for jig, internal grinding, and precision griding of small holes in carbid, ceramics, sapphire, glass and many of the tough, super alloys presently being machined.
CBN mounted points (golden color) are used similarly on tough, high carbon, high chrome steels.

3MM(1/8") shank diameter
6MM(1/4") shank diameter
8MM(3/8") shank diameter
Application: HONGIA diamond mounted points(silver in color) are used for jig, internal
                   grinding, and precision grinding of small holes in carbide, ceramics, sapphire,
                   glass, and many of the tough, super alloys presently being machined.
CBN mounted points(gold in color) are used similarly on tough, high carbon, high chrome steels.
Tool No.
in mm		 D
(mm)		 T
(mm)		 N
(mm)		 L
(mm)		 B
(mm)		 Tool No.
in inch		 D
(inch)		 T
(inch)		 N
(inch)		 L
(inch)		 B
(inch)		 Grit Size
Fine Med Coarse
A3004 0.4 2 3.5 35 3 1016 .016 .079 1/8 2-1/4 1/8 400* 200  
A3005 0.5 2 3.5 35 3 1020 .020 .079 1/8 2-1/4 1/8 300* 200  
A3006 0.6 2 6 35 3 1025 .025 .079 1/4 2-1/4 1/8 200* 150  
A3008 0.8 3 7 35 3 1030 .030 .079 1/4 2-1/4 1/8 200 150*  
A3009 0.9 3 7 35 3 1035 .035 .118 1/4 2-1/4 1/8 200 150* 100
A3010 1.0 3 7 45 3 1040 .040 .118 1/4 2-1/4 1/8 200 150* 100
A3012 1.2 3 12 45 3 1045 .045 .118 1/4 2-1/4 1/8 200 150* 100
A3015 1.5 3 13 45 3 1060 .060 .157 1/2 2-1/4 1/8 200 150 100*
A3020 2.0 4 13 45 3 1080 .080 .157 1/2 2-1/4 1/8 200 150 100*
A3020L 2.0 5 20 45 3 1080L .080 .157 1 2-1/4 1/8 200 150 100*
A3025 2.5 4 13 45 3 1100 .100 .157 1/2 2-1/4 1/8 200 150 100*
A3025L 2.5 5 25 45 3 1100L .100 .157 1 2-1/4 1/8 200 150 100*
A3030 3.0 5 13 45 3 1120 .120 .157 1/2 2-1/4 1/8 200 150 100*
A3030L 3.0 5 25 45 3 1120L .120 .157 1 2-1/4 1/8 200 150 100*
A3035 3.5 5   45 3 1140 .140 .236   2-1/4 1/8 200 150 100*
A3040 4.0 6   45 3 1156 .156 .236   2-1/4 1/8 200 150 100*
A3050 5.0 8   45 3 1203 .203 .312   2-1/4 1/8 200 150 100*
A3060 6.0 8   45 3 1250 .250 .312   2-1/4 1/8 200 150 100*
A6040 4.0 10 30 80 6 4156 .156 .250 1 3" 1/4 200 150 100*
A6050 5.0 10 30 80 6 4203 .203 .250 1 3 1/4 200 150 100*
A6060 6.0 10 35 80 6 4250 .250 .250 1 3 1/4 200 150 100*
A6070 7.0 10   80 6 4282 .282 .250   3 1/4 200 150 100*
A6080 8.0 10   80 6 4312 .312 .375   3 1/4 200 150 100*
A6090 9.0 10   80 6 4375 .375 .375   3 1/4 200 150 100*
A6100 10 10   80 6 4406 .406 .375   3 1/4 200 150 100*
A6120 12 10   80 6 4500 .500 .375   3 1/4 200 150 100*
A6150 15 10   80 6 4730 .730 .375   3 1/4 200 150 100*
A6200 20 10   80 6 4864 .864 .375   3 1/4 200 150 100*
A6250 25 10   80 6 41000 1.000 .375   3 1/4 200 150 100*
A8120 12 10   80 8 6500 .500 .375   3-3/4" 3/8 150 100 80*
A8150 15 10   80 8 6625 .625 .375   3-3/4 3/8 150 100 80*
A9200 20 10   95 9 6750 .750 .375   3-3/4 3/8 150 100 80*
A9250 25 10   95 9 61000 1.000 .500   3-3/4 3/8 150 100 80*
Grit size denoted by asterisk is standard for that diameter, and will be supplied unless specified
otherwise. All of above tools available with CBN; specify"CBN" when ordering.

 

DIAMOND TAPERED HONES FOR DRAWING DIES
Order Code
T 3 03 - 4 C D
 
Cylinder Shaft
Diameter		 Diamond
Diameter
In mm		   Angle Grit size:
C-#100/120
M-#140/170
F-#200/230		 D-Diamond
C-CBN
Diamond plated tapered hones are normally supplied with #100/120 & #140/170 grit, other grit
sizes are available upon request.
When ordering please specify: B(shank diameter), L(total length),t.gif (322 bytes)(including angle), T(diamond
length), D(head diameter) and other details.
STANDARD DIMENSIONS
Tool No. D T T1 B t.gif (322 bytes) U L
TA3050-45 5MM 12MM 6MM 3 45o.gif (138 bytes)   45MM
TA3050-90 5MM 10MM 2.5MM 3 90o.gif (138 bytes)   45MM
TA3060-45 6MM 12MM 6MM 3 45o.gif (138 bytes) 1MM 45MM
TA3060-60 6MM 12MM 5MM 3 60o.gif (138 bytes)   45MM
TA6080-45 8MM 12MM 6MM 6 45o.gif (138 bytes) 3MM 80MM
TA6080-60 8MM 12MM 6MM 6 60o.gif (138 bytes) 1MM 80MM
TA6080-90 8MM 12MM 4MM 6 90o.gif (138 bytes)   80MM
TA6100-45 10MM 12MM 6MM 6 45o.gif (138 bytes) 5MM 80MM
TA6100-60 10MM 12MM 6MM 6 60o.gif (138 bytes) 3MM 80MM
TA6100-90 10MM 12MM 5MM 6 90o.gif (138 bytes)   80MM
TA6120-90 12MM 12MM 6MM 6 90o.gif (138 bytes)   80MM
Diamond plated tapered hones are normally
supplies with #100/120 for TA type,
#140/170 for T 7 TH type, other grit size are
available upon request.
Tool No. D T B t.gif (322 bytes) L
T3030-2.5 3MM 50MM 3 2.5o.gif (138 bytes) 66MM
T3030-3 3MM 50MM 3 3o.gif (138 bytes) 66MM
T3030-3 3MM 12MM 3 3o.gif (138 bytes) 45MM
T3030-3.5 3MM 50MM 3 3.5o.gif (138 bytes) 66MM
T3050-10 5MM 28MM 3 10o.gif (138 bytes) 45MM
T3050-20 5MM 14MM 3 20o.gif (138 bytes) 45MM
T3050-30 5MM 8MM 3 30o.gif (138 bytes) 45MM
T6060-6 6MM 57MM 6 6o.gif (138 bytes) 100MM
T6060-8 6MM 41MM 6 8o.gif (138 bytes) 100MM
T6060-10 6MM 34MM 6 10o.gif (138 bytes) 100MM
T6060-12 6MM 28MM 6 12o.gif (138 bytes) 100MM

Inch sizes of shaft diameter like 1/8", 1/4" are available upon request.


DIAMOND & CBN MOUNTED CONTOUR TOOLS

HONGIA diamond & CBN contour tools are well suited for contour grinding for carbide, ceramics, ferrite, gem, marble, granite and many tough alloys and cermets.
Highly recommended for all kinds of harness steel mold marking.
The Standard Set of Contour Tool Kits
3mm shaft, 45mm O.A.L. Grit mesh is #120/140 (5mm-3mm) or #140/170 (2.5mm-1mm).
(30pcs packing case)
Diamond & CBN Mounred Contour Tools
Diamond electroplated products, 60mm total length & 6mm shaft.
                                                #40/50 and #60/80 are available as standard items

The photo on the left shows our standard 10 pcs-pack including the diamond grits for # 40/50, # 60/80, # 100/120 & # 200/230.

¡@

Diamond plated thin wall drill bits
HONGIA thin wall drill bits are used for drilling marble, graphite, shell etc. Large size drill are most suitable for glass fiber drilling.
Grit size are #45/50, #50/60, #60/80 and #80/100.
Diamond plated forming wheels
The above Formed wheels are used for form grinding of marble, gem, graphite, coral and sponge rubbber.
14F1 type of formed wheels are used in high precision form grinding of ceramic, glass, carbide. Please use CBN instead of Diamond for High Carbon Steel.
Diamond block dressers

 

HONGIA diamond block dressers are used for the surface grinder and rotary dressers are used for the cylindrical grinder. This is for conventional formed wheel truing and dressing.
Diamond plated core drills

CDA TYPE (Tube type) 2" O.A.L
Tool No. Outside Diameter Grit Size
mm inch
CDA-1/16 1.6mm 1/16" #150
CDA-3/32 2.4mm 3/32" #150
CDA-1/8 3.2mm 1/8" #150
CDA-5/32 4.0mm 5/32" #150
CDA-3/16 4.8mm 3/16" #100
CDA-1/4 6.4mm 1/4" #100
CDA-5/16 8.0mm 5/16" #100
CDA-3/8 9.5mm 3/8" #100
CDA-7/16 11.1mm 7/16" #100
CDA-1/2 12.7mm 1/2" #100

CDB TYPE (Shank mounted) 2-3/4" O.A.L
Tool No. Outside Diameter B Grit Size
mm inch
CDB-9/16 14.3mm 9/16" 1/4" #60
CDB-5/8 15.9mm 5/8" 1/4" #60
CDB-11/16 17.5mm 11/16" 1/4" #60
CDB-3/4 19.0mm 3/4" 1/4" #60
CDB-13/16 20.6mm 13/16" 1/2" #60
CDB-7/8 22.2mm 7/8" 1/2" #60
CDB-15/16 23.8mm 15/16" 1/2" #60
CDB-1 25.4mm 1" 1/2" #60
CDB-2 50.8mm 2" 1/2" #60
CDB-3 76.2mm 3" 1/2" #40
Diamond plated circular saws

 DSC TYPE (CONTINUOUS RIM)        C/No. 925
Tool No.
D
T
Grit Size
DSC-2015
2"  50mm
0.015"   0.35mm
#350
DSC-3015
3"  75mm
0.015"  0.35mm
#350
DSC-3018
3"  75mm
0.018"  0.45mm
#200
DSC-3032
3"  75mm
0.032"  0.80mm
#100
DSC-4015
4"  100mm
0.015"  0.35mm
#350
DSC-4018
4"   100mm
0.018"  0.45mm
#200
DSC-4032
4"  100mm
0.032"  0.80mm
#100
DSC-5015
5"  125mm
0.015"  0.35mm
#350
DSC-5018
5"  125mm
0.018"  0.45mm
#200
DSC-6040
6"  150mm
0.040"  1.00mm
#100
DSC-8044
8"  200mm
0.044"  1.10mm
#80
DSC-10048
10"  250mm
0.048"  1.20mm
#80
DSC-12048
12"  300mm
0.048"  1.20mm
#60
 DSS TYPE (WITH SLOTS)              C/No. 926
Tool No.
D
T
W
Grit Size
DSS-2062
2"
1.6mm
1.6mm
# 40
DSS-3062
3"
1.6mm
3.0mm
# 40
DSS-3094
3"
2.4mm
4.0mm
# 40
DSS-3120
3"